Iphone personal hotspot usb network cable unplugged

Which raises the question:. Another Q: I notice that the iPhone IPV4 settings are not the same as the network that I am trying to establish. This might be a problem? I set up the ethernet with the router as Could this be a problem? In any case seems getting the wired Ethernet working again with or without the internet, then adding the internet sharing, will be the best start. Hi Anannya. Thank you again for your time and help. I was able to get the Win 7 Laptop networked with the Mac OS X desktop via ethernet cable so that the two of them see each other and can exchange files.

First step accomplished. Both Machines can also go to the Router administration and make and save changes. The step that I am still having trouble with is the internet connection sharing. I think that the articles are straight forward for a normal situation but not this situation. That is to say iPhone to win 7 hotspot gets internet no problem, and the mac connected via ethernet cable to router was getting internet from win 7.

I know that it is possible. What I do not know is how to tweak the settings to not lose the progress that I have made for ethernet connectivity. DHCP Server: Unidentified Network: No internet sharing enabled. In Networking: In the Wireless connection display from the taskbar the router shows up as available but when I try to connect I get an error - ultimately communication problem with router. Any help in understanding and creating a fix for this would be appreciated as it seems that this is a communication error. If it's already running the latest version, consider uninstalling and reinstalling the driver or rolling the driver back to a previous version.

It might seem impossible to check the internet for outdated network drivers when the network can't reach the internet. This change can work around the technical limitations of the adapter by changing the speed and timing at which it operates. Some users have reported having more success with the Half Duplex option, but note that this setting lowers the maximum total data rate that the device can support.

Remove and reinsert the adapter hardware to verify that it's connected properly. If that doesn't help, try replacing the adapter, if possible. If none of the above procedures fix the "A network cable is unplugged " error, it's possible that the device on the other end of the Ethernet connection, such as a broadband router , is the one malfunctioning. Troubleshoot these devices as needed. Share Pin Email.

How to enable WiFi Personal Hotspot or USB Tethering on an iPhone-easily sharing Internet

Updated December 11, This solution still works with iOS 4. I downloaded the latest iTunes for 64 bit windows make sure if you are using a 64 bit OS you download 64 bit itunes , extracted the AppleApplicationSupport. I first tried 32 bit itunes and it did not work. Thank you for posting this solution, it's great to avoid the entire quicktime and itunes installation on machines that do not need it. Nice effort, very informative, this will help me to complete my task.

Tried on two different, brand spanking new and 'virgin' Win7 x64 Enterprise, with files extracted from 64bit iTunes 10 and iOS 4. Install iTunes - works fine. Uninstall iTunes, stops working. Rebooting and such does not change result. Anyone else? I cannot get this fix to work with the iphone 4 iOS 4.

Can someone help me on this? I don't have iTunes on my new win7 Netbook, but I got tethering to iP4 last weekend.

go

A Guide to Fixing the Network Cable Unplugged Errors in Windows

I was frigging around in the network control panel and at some stage noticed the iPhone had the blue tethering bar on. Problem is I'm not entirely sure how I did it. But I've installed nothing so far. Thanks works great on my mini HP But now i have installed the wrong file first. It works on my iPhone 3gs iOS4. At the end of my Internet session I stop the service again.

Worked 1st time del latitude , iphone 3gs with ios4.

TetherMe "network cable unplugged" | MacRumors Forums

Hey great stuff, thank you for sharing this useful information and i will let know my friends as well. I also operate a site and if you want to ever severe in a little bit of guest writing for me if possible really feel free to let me know, i am usually look for people to check out my site. Hey, appreciate it for taking the effort to do this.

Your Answer

I like your webpage, although it took a sluggish reader like me some time to via throughout entire page and the many comments. Tethering was driving me nuts. I just don't have the time to just "figure it out" You saved the day. Thank you, it works without quicktime installed. Add this to the installation lineup: No more cable unplugged messages anymore.

Thanks, it worked for me. That was some interesting stuff here on www. Thank you for solving this problem and posting it on the web. I have spent about 6 hours trying to do what you have done. Thanks again. Thank you! Thank you, great tutorial. Works fine on a Dell notebook using Windows 7 to iPhone 4.

Only needed to find the bit iTunesSetup. QuickTime stuff not required.

How to troubleshoot this network error

I had to reboot after installing to get it working properly. Thank you very much, worked just like you said on Windows Server R2. Thank you. Worked for me - Win 7, iOS7, iPhone5. Only had to install AppleApplicationSupport.


  • All replies.
  • iphone - How do I troubleshoot personal hotspot mode failing to issue IP addresses? - Ask Different.
  • iPhone USB Tethering without iTunes - Web Sailor's personal blog?
  • Internet tethering says 'cable unplugged'… - Apple Community?
  • mundu tv for symbian mobile.
  • Question Info?

Worked like a charm! Thanks for the article.